HP HP0-Y33 questions and answers

ITCertMaster's training product for HP certification HP0-Y33 exam includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITCertMaster's training about HP certification HP0-Y33 exam not only have more pertinence for the exam and higher quality, but also more comprehensive content.

ITCertMaster is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase ITCertMaster's products, ITCertMaster is proved to be the best website to provide the source of information about certification exam. The product of ITCertMaster is a very reliable training tool for you. The answers of the exam exercises provided by ITCertMaster is very accurate. Our ITCertMaster's senior experts are continuing to enhance the quality of our training materials.

ITCertMaster is a website that provide the counseling courses for IT professionals to participate in HP certification HP0-Y33 exam and help them get the HP HP0-Y33 certification. The courses of ITCertMaster is developed by experienced experts' extensive experience and expertise and the quality is very good and have a very fast update rate. Besides, exercises we provide are very close to the real exam questions, almost the same. When you select ITCertMaster, you are sure to 100% pass your first time to participate in the difficult and critical HP certification HP0-Y33 exam.

We should use the most relaxed attitude to face all difficulties. Although HP HP0-Y33 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because ITCertMaster's HP HP0-Y33 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. ITCertMaster's HP HP0-Y33 exam training materials is the best medicine for candidates.

Exam Code: HP0-Y33
Exam Name: HP (Implementing HP Wireless Networks)
Guaranteed success with practice guides, No help, Full refund!
97 Questions and Answers
Updated: 2013-11-19

HP0-Y33 Free Demo Download: http://www.itcertmaster.com/HP0-Y33.html

NO.1 After completing the configuration and synchronization of all team members, you discover through your
initial testing that your APs cannot associate with your team controllers. To solve this problem what should
you check?
A. that your VSC DHCP parameters are set correctly
B. that you have enabled your local DHCP server on your Team Manager (controller)
C. that an external DHCP server exists and is operational on your network
D. that DHCP Relay has been configured on all your team members (controllers)
Answer: C

HP questions   HP0-Y33 exam   HP0-Y33   HP0-Y33 dumps   HP0-Y33

NO.2 In your existing wireless network you have a variety of E-MSM controllers. Which products are capable
of supporting teaming? (Select two.)
A. E-MSM710
B. E-MSM730
C. E-MSM750
D. E-MSM760
E. E-MSM765zl
Answer: D,E

HP exam dumps   HP0-Y33   HP0-Y33 exam prep   HP0-Y33 exam

NO.3 which feature should you enable to enhance Layer 2 (L2) roaming?
A. seamless roaming
B. rapid authentication
C. WPA2 Opportunistic Key Caching
D. single network AP hopping
Answer: C

HP demo   HP0-Y33 demo   HP0-Y33

NO.4 On a VSC, which Traffic Type options can be specified for egress VLANs? (Select three.)
A. default gateway traffic
B. IP filtered traffic
C. authenticated traffic
D. untagged traffic
E. intercepted traffic
F. unauthenticated traffic
Answer: C,E,F

HP answers real questions   HP0-Y33   HP0-Y33 certification

NO.5 In order to create a new VLAN in an MSM controller configuration, which path should you take to
access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
Answer: D

HP   HP0-Y33 questions   HP0-Y33   HP0-Y33

NO.6 When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC
egress VLAN configured?
A. when the Group is created
B. when the AP is synchronized with its Group
C. when the specified VLAN is created
D. when the VSC is bound to the Group
Answer: D

HP   HP0-Y33   HP0-Y33   HP0-Y33 certification training   HP0-Y33

NO.7 Click the Exhibit button.
You have deployed a guest wireless service in the reception area of a marketing firm. The clients
associated with the guest service should be assigned to VLAN 10. When you test the configuration,
clients are being assigned IP addresses in the 192.168.0.0 subnet. You view the access controller
configuration shown in the exhibit.
Which command resolves the issue by correctly associating VLAN 10 with the appropriate interface.?
A. [sysname-wlan-st-1] port access vlan 10
B. [sysname-WLAN-ESS1] port access vlan 10
C. [sysname-GigabitEthernet1/0/1] port access vlan 10
D. [sysname-Vlan-interface10] port access vlan 10
Answer: B

HP   HP0-Y33 study guide   HP0-Y33 test   HP0-Y33 test

NO.8 An HP E-MSM760 Controller receives untagged traffic on its LAN port from a wireless client associated
with an access point from another manufacturer. In a WLAN configured with VSCs 1-4, which VSC will be
selected to pass this traffic?
A. VSC 2
B. VSC 3
C. VSC 4
D. default VSC
Answer: D

HP   HP0-Y33   HP0-Y33 certification training   HP0-Y33 exam dumps

NO.9 .What are the major benefits of creating a team of controllers? (Select two.)
A. controller redundancy
B. Flow support
C. local DHCP support
D. PPTP client and server support
E. single IP management of all team controllers
Answer: A,E

HP exam simulations   HP0-Y33 pdf   HP0-Y33   HP0-Y33   HP0-Y33 certification training

NO.10 What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: E

HP exam simulations   HP0-Y33   HP0-Y33 braindump

NO.11 In the configuration of an E-MSM760 controller, you find that the default VSC is access controlled.
Which statements are true about an inbound packet on the LAN port which does not have a VLAN tag?
(Select two.)
A. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
B. The packet is associated with that VSC if the packet has a known SSID tag.
C. The packet is dropped as the LAN port will only accept VLAN tagged packets.
D. The packet is associated with the default VSC if it has no matching SSID tag.
E. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
Answer: B,D

HP   HP0-Y33   HP0-Y33 questions   HP0-Y33

NO.12 Your controller's Team Manager has suffered a catastrophic failure and an Interim Manager has been
selected. Which action is required to allow the Interim Manager to distribute a new software release to its
team members?
A. The Interim Manager is promoted to Team Manager status.
B. The Interim Manager is rebooted and reconfigured as the new Team Manager.
C. The Interim Manager promotes another team member to Team Manager and the new TeamManager
uploads the new software to the team members.
D. Each Team Member is manually upgraded from the Interim Manager.
Answer: A

HP exam simulations   HP0-Y33 test answers   HP0-Y33

NO.13 When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
Answer: D

HP   HP0-Y33 practice test   HP0-Y33   HP0-Y33

NO.14 When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
Answer: D

HP exam simulations   HP0-Y33 test   HP0-Y33   HP0-Y33 original questions

NO.15 A financial institution needs to deploy 80 access points in their new building. Since the institution is not
interested in purchasing additional wired switches for their LAN infrastructure, which solution should be
recommended to manage the access points?
A. HP A3000-24G-PoE+ Wireless Switch
B. HP A-WX5002 Access Controller
C. HP A-WX5004 Access Controller
D. HP A7500/E7900 Access Controller Module
Answer: C

HP demo   HP0-Y33   HP0-Y33 test answers

ITCertMaster offer the latest VCP-510 Practice Test and high-quality 70-492 PDF Exam Questions training material. Our 70-487 VCE testing engine and 1z0-559 dumps can help you pass the real exam. High-quality HP2-Z26 Exam Questions & Answers can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertmaster.com/HP0-Y33.html